Vaddio IR Remote Commander 998-2100-000 User's Manual

This Vaddio IR Remote Commander 998-2100-000 User's Manual will help you easily program your Vaddio RoboSHOT HDMI 12 Camera. 

Vaddio IR Remote Commander 998-2100-000

The Vaddio IR Remote Control 998-2100-000 comes with the following key features:

  • Preset Activation: IR Remote is limited to executing Presets 1 through 6
  • Tri-Sync Speed on Preset: If a global Tri-Sync speed is stored in the preset by the user/admin, then that speed is used. If no Tri-Sync speed is assigned, then a default (medium) speed will be used.
  • Preset Store: IR Remote is limited to positional (PTZ) type presets. To set a preset, position the camera, hold down the Preset Button and touch the one of the preset numbered buttons 1 through 6

Learn how to operate the following functions of your Vaddio Remote Control:

 Camera Power On/Off (Toggle on/off same button)
 Back Light Compensation (Toggle on/off same button)
 Data Screen: Toggle on/off the OSD for the RoboSHOT’s IP/MAC Address
 Camera Select (the remote can operate 3 cameras (with 3-IR Freq.)
 Pan/Tilt and Home controls with Reverse and Std. Pan direction
 Pan/Tilt Reset
 Auto Focus (Toggle on/off same button)
 Zoom In/Out controls Wide & Telephoto
 Fast speed controls (W & T)
 Slow speed controls (W & T)
 Manual Focus On/Off control (Toggle on/off same button)
 Near (-) adjustment
 Far (+) adjustment
 Six (6) pan/tilt/zoom positioning presets (1 through 6)
 Preset Set (store)
 Preset Reset (clear)
 Red LED that indicates IR Transmission and battery level

Get the Downloadable Vaddio IR Remote Commander 998-2100-000 User's Manual here:

 

Need another Vaddio IR Remote Commander 998-2100-00? Get one here at Best Deal Remotes!

exit popup