Skip to content
USA Free Standard Shipping, Canada $14.99 & Worldwide $19.99
USA Free Standard Shipping, Canada $14.99 & Worldwide $19.99

Philips SRP2024A/27 Remote Control User's Manual & Code List

Philips SRP2024A/27 Remote Control: User's Manual and Code List

 

Table of Contents

  1. Getting to Know Your Remote Control

    • Remote Control Layout

    • Understanding the Buttons

  2. Getting Started: Installing Batteries

  3. Setting Up Your Remote Control

    • Method 1: Direct Code Entry (Recommended)

    • Method 2: Automatic Code Search

    • Method 3: Learning Functions from Your Original Remote Control

    • Clearing Learned Functions

  4. Using Your Remote Control

    • Switching Between Devices

    • Basic Remote Functions

    • Using the Flip & Slide Cradle for Fire TV Remote

  5. Code List

    • How to Use the Code List

    • Example Code List (Refer to Your Remote's Included Manual for Full List)

  6. Troubleshooting: Quick Reference Guide

  7. Troubleshooting: Detailed Solutions

    • The Remote Control Isn't Working at All

    • Remote Controls the Wrong Device or Only Some Functions

    • Volume Buttons Don't Work

    • Channel Buttons Don't Work

    • Buttons Feel Sticky or Unresponsive

    • Batteries Are Draining Quickly

    • Problems While Learning Functions

    • Fire TV Remote Not Working in the Cradle

  8. Care and Maintenance

    • Cleaning Your Remote Control

    • Storing Your Remote Control

  9. Important Technical Information

1. Getting to Know Your Remote Control

Your Philips SRP2024A/27 remote control is designed to make your entertainment experience easier by controlling up to four different devices. This can include your television, streaming devices (like Roku, Apple TV, or Fire TV players), DVD or Blu-ray players, and audio systems like soundbars.

Remote Control Layout

Philips SRP2024A/27 Remote Control

Understanding the Buttons

Here's a simple guide to what each button does:

  • POWER Button (Top Right): Turns your selected device On or Off.

  • INPUT Button (Top Left): Changes the video input source on your TV (for example, switching from Cable to DVD).

  • DEVICE Buttons (TV, STR, DVD, AUD):

    • TV: Selects your television.

    • STR (Stream): Selects your streaming device (like a Roku box, Apple TV, or Fire TV).

    • DVD: Selects your DVD or Blu-ray player.

    • AUD (Audio): Selects your sound system or audio receiver.

    • To use any function, first press the button for the device you want to control.

  • MENU Button: Opens the main menu of your selected device.

  • Navigation Buttons (Up, Down, Left, Right Arrows): Used to move around menus and selections on your screen.

  • OK Button (Center of Arrows): Selects an option or confirms a choice in a menu. Also often brings up the channel list on your TV.

  • EXIT Button: Leaves the current menu or screen.

  • Back Arrow Button: Goes back to the previous channel, menu, or page.

  • Playback Buttons (Rewind, Play, Fast Forward, Pause, Stop, Record): Used to control movies, music, or recorded programs.

  • Red, Green, Yellow, Blue Buttons (A, B, C, D): These "color buttons" have different uses depending on what's on your screen or the device you're controlling. They often relate to special features in menus.

  • VOL +/- (Volume Up/Down): Controls the sound level.

  • CH +/- (Channel Up/Down): Changes the channel.

  • MUTE Button: Turns the sound on or off without changing the volume level.

  • LAST Button: Returns to the previous channel you were watching.

  • Number Pad (0-9): Used to enter channel numbers or programming codes.

  • DASH (-) Button: Used for entering digital sub-channels (like 7-1 or 2-3).

  • ENTER Button: Confirms an entry, like a channel number.

  • SLEEP Button: Sets a sleep timer on some TVs, which turns the TV off after a set time.

  • SETUP Button: Used for programming your remote control.

2. Getting Started: Installing Batteries

Your Philips SRP2024A/27 remote control uses two AAA batteries.

  1. Open the Battery Compartment: On the back of the remote control, you will see a small tab or indentation at the bottom of the battery cover. Gently press down on the tab and slide the cover downwards to open it.

    (Imagine a picture here showing the back of the remote and how to slide the battery cover off.)

  2. Insert the Batteries: Place two fresh AAA batteries into the compartment. Make sure to match the positive (+) and negative (-) ends of the batteries with the markings inside the compartment. The spring usually goes on the negative (-) end.

    (Imagine a picture here showing AAA batteries being inserted with correct + and - alignment.)

  3. Close the Battery Compartment: Slide the battery cover back up until it clicks firmly into place.

Important Battery Tips:

  • Always use new AAA alkaline batteries. Do not mix old and new batteries, or different types of batteries (like alkaline and rechargeable).

  • If your remote will not be used for a long time (more than a month), it's a good idea to remove the batteries to prevent leaks.

  • Dispose of old batteries responsibly according to local regulations.

3. Setting Up Your Remote Control

Your Philips universal remote can control many different brands of devices, including popular brands like Samsung, LG, Sony, Vizio, Panasonic, Sharp, Insignia, and Toshiba televisions, Roku and Apple TV streaming players, and various cable and satellite boxes. There are a few ways to set it up. We recommend trying Method 1 first.

Method 1: Direct Code Entry (Recommended)

This is the fastest way to set up your remote if you know the code for your device brand.

  1. Turn On Your Device: Switch on the device you want to control (for example, your TV).

  2. Find Your Device Type: On the Philips remote, press and hold the button for the device you want to program (for example, TV for your television, STR for your streaming box, DVD for your DVD player, or AUD for your audio system).

  3. Watch for the Light: Keep holding the button for about 5 seconds. The red light on the remote control will turn on and stay on, meaning the remote is ready to be programmed.

  4. Enter the Code: While the red light is on, use the number pad to enter the 3, 4, or 5-digit code for your device's brand. You will find these codes in the "Code List" section of this manual or in the small booklet that came with your remote. Try the first code listed for your brand.

  5. Confirm the Code: After you enter the last digit, the red light should flash once and then turn off. This means the code was accepted.

  6. Test the Remote: Now, try using the remote to control your device. Try pressing the POWER button, VOL +/-, and CH +/-.

    • If it works: Congratulations! Your remote is set up.

    • If it doesn't work: The code you entered might not be the correct one. Repeat these steps and try the next code listed for your brand. If none of the codes work, try Method 2: Automatic Code Search.

Method 2: Automatic Code Search

If you can't find a code for your device, or the direct codes don't work, the remote can search for the right code automatically.

  1. Turn On Your Device: Switch on the device you want to control.

  2. Find Your Device Type: Press and hold the button for the device you want to program (e.g., TV, STR, DVD, or AUD).

  3. Watch for the Light: Keep holding the button for about 5 seconds. The red light on the remote control will turn on and stay on.

  4. Start the Search: While the red light is on, press the POWER button once. The red light will now start flashing continuously. This means the remote is sending out different codes to find the right one.

  5. Point and Wait: Point the remote control at your device (like your TV) and wait. The remote will slowly send out many codes.

  6. Stop When Device Turns Off: As soon as your device (TV, DVD player, etc.) turns OFF, immediately press the OK button on the remote. This tells the remote to stop searching and save that code.

    • It's very important to press OK right away, or the remote might send the next code and miss the correct one.

  7. Test the Remote: Test the remote by pressing POWER to turn the device back on, and then try VOL +/- or CH +/-.

    • If it works: Your remote is set up.

    • If it doesn't work well, or you missed the code: Repeat these steps from the beginning.

Method 3: Learning Functions from Your Original Remote Control

If a specific button on your universal remote doesn't work the way you want, or if your original remote has a special function not covered, you can "teach" your Philips remote to copy a command.

  1. Get Both Remotes Ready: Place your Philips SRP2024A/27 remote and your original remote on a flat surface (like a table), facing each other, with about 1 to 2 inches (3-5 cm) of space between them.

    (Imagine a picture here showing the two remotes facing each other.)

  2. Start Learning Mode:

    • Press and hold the device button on your Philips remote (e.g., TV) for about 5 seconds until the red light stays on.

    • While the red light is on, quickly enter the code 99900 using the number pad. The red light will flash once and then stay on. This means the Philips remote is ready to learn.

  3. Select Button to Learn: On your Philips remote, press the button you want to teach (for example, if you want the "A" button to do something specific, press the "A" button). The red light on the Philips remote will flash twice and then stay on.

  4. Teach the Command: On your original remote, press and hold down the button that performs the function you want to copy (for example, hold down the "Input" button on your original TV remote).

  5. Confirm Learning: Keep holding the button on the original remote. The red light on the Philips remote should flash once and then stay on. This means the command was successfully learned.

  6. Learn More or Finish:

    • To learn another command, repeat steps 3-5.

    • To stop learning, simply wait for about 15 seconds without pressing any buttons, or press any device button (TV, STR, DVD, AUD). The red light will turn off.

  7. Test the Learned Button: Test the newly programmed button on your Philips remote.

Clearing Learned Functions

If you want to remove a learned function or reset a device's programming:

  • To Clear All Learned Functions for a Specific Device:

    1. Press and hold the device button on your Philips remote (e.g., TV) for about 5 seconds until the red light stays on.

    2. Quickly enter the code 99910 using the number pad. The red light will flash once and then turn off. All learned functions for that device button are now erased.

  • To Clear a Single Learned Function: This remote usually clears all learned functions for a device at once. If you only want to change one, you'll need to re-learn the new function over the old one, or clear all and re-learn the ones you want to keep.

4. Using Your Remote Control

Switching Between Devices

To control a different device (like your DVD player instead of your TV):

  1. Press the corresponding device button (DVD in this example) on your Philips remote.

  2. The red light will briefly light up, confirming you've switched.

    Now, all the buttons on your Philips remote will try to control your DVD player. Remember to press the correct device button before trying to control a different piece of equipment.

Basic Remote Functions

  • Volume Control: The VOL +/- buttons will usually control the volume of your TV or soundbar, even if you're controlling another device. If you want to control the volume of a specific device, make sure that device is selected.

  • Channel Surfing: Use CH +/- to change channels on your TV or cable/satellite box.

  • Navigating Menus: Use the Navigation Arrows (Up, Down, Left, Right) to move through menus on your screen. Press OK to select.

  • Going Back/Exiting: The Back Arrow often takes you to the previous screen or channel. EXIT takes you out of menus.

Using the Flip & Slide Cradle for Fire TV Remote

The Philips SRP2024A/27 features a special cradle that slides out from the bottom of the remote. This is designed to hold your Amazon Fire TV remote control (sold separately).

  1. Slide Out the Cradle: Gently slide the bottom part of your Philips remote downwards until the cradle is extended.

    (Imagine a picture here showing the cradle being slid out.)

  2. Insert Your Fire TV Remote: Carefully place your compatible Fire TV remote into the cradle. It should fit snugly.

    (Imagine a picture here showing the Fire TV remote being placed into the cradle.)

  3. Slide Back In: Once the Fire TV remote is in place, you can slide the cradle back into the Philips remote, keeping your Fire TV remote conveniently attached.

This cradle helps you keep both remotes together. The Philips universal remote controls most of your regular devices, while your Fire TV remote (which usually uses Bluetooth for voice control) can stay attached for quick access to your streaming functions.

5. Code List

This section provides an example of how the code list for your remote is structured. The full, detailed list for your Philips SRP2024A/27 remote control is typically included in the original packaging or can be found on the official Philips support website. Please refer to that list for the most comprehensive and up-to-date codes for your specific devices (e.g., Sony, LG, Samsung, Vizio, Sharp, TCL, Hisense televisions; Roku, Amazon Fire TV, Apple TV, Chromecast streaming players).

How to Use the Code List

  1. Identify Your Device Type: Look for the section that matches the device you want to control (e.g., "TV," "DVD Player," "Streaming Device").

  2. Find Your Brand: Within that section, locate your device's brand name (e.g., "SAMSUNG," "VIZIO," "ROKU").

  3. Note the Codes: Write down the 3, 4, or 5-digit codes listed next to your brand. Try the first code listed for your brand first, as it's often the most common.

Example Code List (Partial – Refer to Your Remote's Included Manual for Full List)

TVs (including LCD, Plasma, & Panel TVs)

Brand 3-Digit Codes 4-Digit Codes 5-Digit Codes
SAMSUNG 0001, 0002 0000, 0001 00001, 00002
LG 0020, 0021 0020, 0021 00020, 00021
SONY 0010, 0011 0010, 0011 00010, 00011
VIZIO 0030, 0031 0030, 0031 00030, 00031
PANASONIC 0040, 0041 0040, 0041 00040, 00041
SHARP 0050, 0051 0050, 0051 00050, 00051

Streaming Devices (STR)

Brand 3-Digit Codes 4-Digit Codes 5-Digit Codes
ROKU 0500, 0501 0500, 0501 00500, 00501
AMAZON FIRE 0510, 0511 0510, 0511 00510, 00511
APPLE TV 0520, 0521 0520, 0521 00520, 00521

And many more brands for DVD, Blu-ray, Cable, Satellite, and Audio devices.

6. Troubleshooting: Quick Reference Guide

Problem Quick Solution
Remote not working at all 1. Check/Replace Batteries. 2. Point directly at device. 3. Try the "Camera Test" (see detailed troubleshooting).
Remote controls the wrong device/some buttons don't work 1. Ensure the correct device button (TV, STR, DVD, AUD) is pressed. 2. Re-enter the code for your device (try another code from the list). 3. Use Automatic Code Search.
Volume buttons don't work 1. Ensure the remote is set to control your TV or Audio device. 2. If using a soundbar, set remote to control "AUD" (Audio) or program volume specifically for it.
Batteries drain quickly Ensure you are using new AAA alkaline batteries. If problem persists, try a different brand of battery.
Buttons feel sticky or unresponsive Try cleaning the remote (see Care & Maintenance).
Problems with Learning Functions Ensure remotes are 1-2 inches apart, facing each other. Try again, holding the original remote button down firmly.
Fire TV Remote not working in cradle Ensure your Fire TV remote is charged/has fresh batteries. The cradle is for holding, not for power or connectivity to the universal remote itself.

7. Troubleshooting: Detailed Solutions

If you're having trouble with your remote, try these solutions:

The Remote Control Isn't Working at All

  • Check and Replace Batteries: This is the most common reason. Open the battery compartment (see Section 2) and replace the old batteries with two fresh AAA alkaline batteries. Make sure they are inserted correctly, matching the (+) and (-) signs.

  • Line of Sight: Your universal remote uses a signal called "infrared" (IR). This signal needs a clear path to your device (like your TV or DVD player). Make sure nothing is blocking the path between the remote and the device's sensor.

  • Distance: The remote works best within about 33 feet (10 meters) of your device. Make sure you are not too far away.

  • The "Camera Test" (Checking for a Signal):

    1. Get a smartphone or a digital camera.

    2. Open the camera app on your phone.

    3. Point the very front tip of your Philips remote (where the light comes out) towards the camera lens on your phone.

    4. Press any button on the Philips remote.

    5. Look at your phone screen: If the remote is working, you should see a small, flickering white or purple light coming from the tip of the remote on your phone's screen. If you don't see any light, your remote might be faulty and needs to be replaced. (Note: Some newer iPhone cameras have IR filters, so try the "selfie" (front-facing) camera if the main camera doesn't show anything).

Remote Controls the Wrong Device or Only Some Functions

  • Check Device Button: Always make sure you've pressed the correct device button (TV, STR, DVD, AUD) at the top of the remote before trying to control that device. The remote will only send commands to the device currently selected.

  • Try a Different Code: It's possible the code you entered is only partially correct. Go back to Method 1 (Direct Code Entry) and try the next code listed for your device's brand in the Code List.

  • Use Automatic Code Search: If Direct Code Entry isn't working, try Method 2 (Automatic Code Search). This can sometimes find codes that work better.

  • Use Learning Functions: If most buttons work but a specific one doesn't (like a special menu button), use Method 3 (Learning Functions) to teach that specific button from your original remote.

Volume Buttons Don't Work

  • Wrong Device Selected: Ensure you have selected the correct device. If you're watching TV, press the TV button. If you're listening through a soundbar, you might need to select the AUD (Audio) button, or make sure your TV is sending sound to the soundbar correctly.

  • Try Different Codes: Sometimes, a working code for basic functions like power and channel might not include the correct volume codes. Try another code for your TV or audio device.

Channel Buttons Don't Work

  • Wrong Device Selected: Make sure you've pressed the TV or CABLE/SAT device button (if you have a cable box) on the remote. The channel buttons won't work if you're set to control a DVD player.

  • Digital Channels: For digital channels with sub-channels (like 7.1), make sure you're pressing the channel number, then the DASH (-) button, then the sub-channel number (e.g., 7 - 1).

Buttons Feel Sticky or Unresponsive

  • Cleaning: Over time, dirt or spills can get under the buttons. Try cleaning your remote (see Section 8: Care and Maintenance).

  • Wear and Tear: If the remote is very old or has been dropped many times, the internal parts might be worn out. In this case, you might need a new remote.

Batteries Are Draining Quickly

  • Battery Type: Always use good quality new AAA alkaline batteries. Cheaper batteries or non-alkaline types might not last as long.

  • Usage: Heavy use of the remote, especially if you're frequently pressing buttons, can use up batteries faster.

  • Faulty Remote: In rare cases, a problem inside the remote could cause it to use too much power. If new batteries drain very quickly, and you've checked other points, the remote might need replacing.

Problems While Learning Functions (LED Flashes Six Times)

  • If the red light on your Philips remote flashes six times quickly after you try to learn a function, it means the learning was not successful.

  • Try Again: Make sure both remotes are on a flat surface, pointing directly at each other, about 1 to 2 inches (3-5 cm) apart.

  • Hold Down Original Button: When teaching, make sure you press and hold down the button on your original remote for a few seconds until the Philips remote confirms it's learned.

  • Battery Check: Ensure both remotes have fresh batteries.

Fire TV Remote Not Working in the Cradle

  • The Flip & Slide Cradle is just a holder. The Philips universal remote does not power your Fire TV remote or connect to it electronically.

  • Check Your Fire TV Remote: Ensure your Fire TV remote itself has good batteries and is properly paired with your Fire TV stick or box. The Philips universal remote controls the TV and other devices, while the Fire TV remote controls the Fire TV player.

8. Care and Maintenance

Taking good care of your remote control will help it last longer.

Cleaning Your Remote Control

  • Gentle Cleaning: To clean the outside of your remote, gently wipe it with a soft, slightly damp cloth. You can lightly dampen the cloth with a mix of 50% rubbing alcohol and 50% water.

  • Around Buttons: For dirt or dust around the buttons, you can use a cotton swab lightly dampened with the same cleaning solution.

  • Avoid Excess Moisture: Do not get the remote too wet, and never spray cleaning liquids directly onto the remote.

  • Dry Before Use: Make sure the remote is completely dry before putting batteries back in or using it.

  • Battery Compartment: If you see any white or green powdery residue in the battery compartment (battery leakage), use a cotton swab dampened with a little white vinegar to carefully clean the metal contacts. Let it dry completely before inserting new batteries.

Storing Your Remote Control

  • If you plan not to use the remote for a long time (more than a month), it's best to remove the batteries. This prevents the batteries from leaking and potentially damaging the remote.

  • Store it in a cool, dry place away from direct sunlight or extreme temperatures.

9. Important Technical Information

  • Battery Type: 2 x AAA batteries (Alkaline recommended)

  • Wireless Technology: Infrared (IR). This means the remote sends light signals that your devices "see." It requires a clear path from the remote to the device you want to control.

  • Operating Distance: Works reliably up to about 33 feet (10 meters).

  • Number of Controlled Devices: 4 (TV, STR, DVD, AUD)

  • Code Database: Includes codes for thousands of audio and video device brands.