One For All URC 7935 Streamer Remote Manual, Setup Codes & Pairing Guide

One For All URC 7935 Streamer Remote Manual & Programming Guide

Managing multiple handsets across your home entertainment center can quickly become confusing. The One For All URC 7935 Streamer Remote simplifies your living room by unifying your streaming device, television, and audio soundbar into a single, intuitive transmitter. Unlike older legacy infrared-only remotes that required entering long code lists for every function, or original Apple TV Siri controllers that lacked traditional channel and mute buttons, the URC 7935 combines universal control, customizable color-ring feedback, and direct app macro shortcuts. Whether you are setting up your streamer for the first time, mapping audio to a soundbar, or troubleshooting button response, this master guide provides clear, easy-to-follow steps for every procedure.

Table of Contents

• Quick-Fix Setup: How to Pair Your One For All Streamer Remote Immediately
• Complete Button Map & Casing Directory
• Device Compatibility & Identification Numbers
• Step-by-Step Programming & Setup Methods
• 5-Digit Programming Code Directory
• Advanced Customization & Macro Customization
• Technical Specifications & Signal Requirements
• High-Intent Troubleshooting & Frequently Asked Questions
• Quick Reference Problem & Solution Summary

Quick-Fix Setup: How to Pair Your One For All Streamer Remote Immediately

If you own a standard Roku set-top streaming box, your One For All URC 7935 transmitter is pre-programmed and ready to work right out of the box! Simply install fresh batteries, point the clicker at your Roku device, and test the navigation ring.

For all other streaming boxes, televisions, and soundbars, follow these instant SimpleSet steps to pair your controller in under 60 seconds:

1. Turn On Your Device: Ensure your television, streaming player, or audio system is fully powered on (not in standby mode).
2. Enter SimpleSet Mode:
   • To Program a TV: Press and hold TV POWER and BACK simultaneously until the top LED ring blinks Yellow twice.
   • To Program a Streaming Box: Press and hold STREAMER POWER and HOME simultaneously until the LED ring blinks Red twice.
   • To Program an Audio Receiver or Soundbar: Press and hold VOLUME + and VOLUME - simultaneously until the LED ring blinks Green twice.
3. Press and Hold Your Brand Key: Press and hold down the number digit key assigned to your major device brand (e.g., hold digit 6 for Samsung TV).
4. Release on Action: The handset will transmit a power or mute signal every 3 seconds. The moment your device responds (turns off or mutes), immediately release the key.
5. Confirmation: The menu ring will blink green twice to confirm your settings are locked into memory.

Complete Button Map & Casing Directory

Understanding every button layout on your handset makes menu navigation fast and frustration-free. Below is the complete physical key layout map for the One For All URC 7935 Streamer Wand:

Physical Button Casing Label	Icon / Visual Identifier	Native Function / Quick Action Description
TV Power	TV symbol inside circle (Top Left)	Toggles the main television power ON or OFF.
TV Input	Square with inward arrow (Top Center)	Cycles through television HDMI and AV input sources. Activates Input Shift mode.
Streamer Power	Power symbol (Top Right)	Toggles your streaming box or digital media receiver ON or OFF.
Back	Left-pointing arrow	Returns to the previous screen or menu layer inside streaming applications.
Home	House icon	Returns directly to the primary home menu screen of your streamer.
Directional Ring	Circular ring around OK button	Navigates UP, DOWN, LEFT, and RIGHT through on-screen streaming menus.
OK	Center round button	Confirms selections, executes highlighted items, or toggles playback options.
Replay	Curved counter-clockwise arrow	Skips backward 10-30 seconds during media playback in supported applications.
Options / Menu	Asterisk (*) or gear icon	Opens pop-up context menus, video quality settings, or audio channel choices.
Rewind / Fast Forward	Double left arrows / Double right arrows	Scans video backward or forward at variable speed steps.
Play / Pause	Combination play triangle and pause bars	Starts, pauses, or resumes movie and video stream playback.
Volume + / Volume -	Plus and minus icons	Increases or decreases system audio output on TV, Soundbar, or AV Receiver.
Mute	Speaker with slash icon	Instantly silences and restores all system audio output.
App Shortcut Keys	N, H, VUDU / A, Play Icon	Launches dedicated streaming services (Netflix, Hulu, Prime, YouTube) via dynamic macros.

Device Compatibility & Identification Numbers

The One For All URC 7935 controller is compatible with thousands of media devices operating on standard infrared (IR) frequencies across North America and international markets.

Exact Model Numbers	URC 7935, URC-7935, URC7935
Manufacturer & Import Part Numbers	712885, RDN1030920, OFA STREAMER URC 7935
US Importer Entity	Universal Electronics Inc., UEI Technical Support Services, Euclid, OH 44132
Manufacturing Origin	Made in China
Primary Device Ecosystems	Apple TV (HD, 4K, A1625), Roku (Express, Premiere, Ultra), Nvidia Shield, Xiaomi Mi Box, Xbox, Smart TVs, Soundbars

Supported Equipment Categories

• Streaming Media Boxes: Apple, Roku, Nvidia Shield, Xiaomi, Matricom, Dune HD, Western Digital, Xbox, Sling Media, Boxee, Asus, and Android TV units.
• Television Brands: Samsung, LG, Sony, Vizio, TCL, Hisense, Toshiba, Sharp, Insignia, Philips, Panasonic, RCA, Element, Sceptre, Magnavox, Emerson, and Westinghouse.
• Soundbars & AV Receivers: Bose, Sonos, Yamaha, Denon, Onkyo, Polk Audio, Vizio, Samsung, JBL, Klipsch, LG, Sony, Pioneer, Marantz, and Pioneer.

Step-by-Step Programming & Setup Methods

Method 1: Manual Code Setup (5-Digit Direct Entry)

If the automated SimpleSet procedure does not locate your exact device model, enter direct 5-digit brand codes using the remote's top numerical button key mapping (where digits 1 through 6 correspond to top physical buttons):

1. Turn on your television or audio receiver manually.
2. Press and hold TV POWER and BACK (for TV) or STREAMER POWER and HOME (for Streamer) until the LED ring blinks twice.
3. Enter the first 5-digit numeric code corresponding to your manufacturer from the code table below.
4. Upon valid code entry, the menu ring will blink green twice.
5. Point the handset at your equipment and press POWER (or MUTE for audio gear). If the unit turns off or silences, programming is complete!

Method 2: Learning Mode (Copying Commands From Original Remote)

If your original manufacturer remote has special keys missing on universal lists, you can teach those functions directly to the URC 7935 clicker:

1. Place the URC 7935 and your original remote control on a flat surface, pointing their top infrared transmitters directly at each other approximately 1 inch (2 to 5 cm) apart.
2. Press and hold TV POWER and MUTE on the URC 7935 until the LED ring blinks Red twice.
3. Press and release the key on the URC 7935 where you wish to assign the learned function. The LED ring will blink red once and turn off.
4. Press and release the desired button on your original handset.
5. The LED ring will blink Green twice to indicate successful capture. Repeat steps 3 and 4 to program additional keys.
6. Hold down TV POWER until the ring blinks green four times to save and exit learning mode.

Method 3: Specialized Roku TV Setup Sequences

If you are connecting your handset to a TV running integrated Roku OS (such as TCL, Hisense, Insignia, or Sharp), execute these custom bypass commands:

• For TCL, RCA, Hisense, Sharp, or Sanyo Roku TVs: Hold down STREAMER POWER and HOME until the ring blinks red twice. Press the BACK key 5 consecutive times. The ring will flash green twice to lock code architecture.
• For Insignia Roku TVs: Hold down STREAMER POWER and HOME until the ring blinks red twice. Press the REPLAY key 5 consecutive times. The ring will flash green twice.

5-Digit Programming Code Directory

Use these 5-digit manufacturer codes when performing the Manual Code Setup sequence described above:

Device Category	Brand Name	Primary 5-Digit Programming Codes
Television	Samsung	20812, 20060, 20702, 31331, 21264
Television	LG	21423, 22182, 21840, 20178, 22312
Television	Sony	20810, 20000, 21505, 21825, 21100
Television	VIZIO	21758, 20864, 20885, 31331, 22514
Television	TCL / Hisense	22429, 21756, 35311, 34633, 31331
Streaming Media	Roku (Boxes & Sticks)	21758, 32371, 33282, 31756, 31415
Streaming Media	Apple TV (HD / 4K)	11115, 22615, 12615, 31115
Streaming Media	Nvidia Shield / Android TV	31272, 32084, 33061, 31524
Soundbar / Audio	Bose	11229, 11933, 13708, 10639
Soundbar / Audio	Sonos	13532, 13914, 11825, 12115
Soundbar / Audio	Yamaha	10176, 12021, 12467, 13542
Soundbar / Audio	Vizio / Samsung Soundbar	12457, 13320, 11868, 12137

Advanced Customization & Macro Customization

Programming App Shortcut Macros

You can program the four dedicated app keys at the bottom of your remote to automatically trigger a sequence of keypresses that launches your favorite streaming service:

1. Sit in front of your powered-on streaming device.
2. Press and hold the target App Shortcut key (e.g., N) until the LED ring blinks twice.
3. Press the exact sequence of navigation keys required on your device home screen to reach and launch that specific application.
4. Once the streaming application begins loading on your TV screen, press and hold the same App Shortcut key until the LED ring blinks green twice. The macro sequence is now saved!

Deleting an App Shortcut Macro

To clear a programmed macro and return the app button to default: press and hold the macro key until the LED ring blinks twice. Release the button, then immediately press and hold the same button down again until the LED flashes twice.

Customizing the Colored LED Menu Ring

Change the visual feedback color of your controller ring to match your room decor or preferences:

1. Press and hold CHANNEL UP and CHANNEL DOWN until the ring blinks red twice.
2. Press CHANNEL UP. The LED ring will light up white.
3. Press CHANNEL UP repeatedly to cycle forward through available colors (Yellow, Green, Red, Blue, Purple, Cyan, White). Press CHANNEL DOWN to cycle backward.
4. Press and hold OK to lock in your custom color selection.

Enabling or Disabling Remote Backlighting

To turn the key backlighting ON or OFF to save battery charge, hold down TV POWER and the PLAY ICON (YouTube) shortcut button simultaneously until the menu ring blinks green 4 times. Repeat the exact command to re-enable backlighting (confirmed by 2 green blinks).

Technical Specifications & Signal Requirements

• Operating Voltage & Power Supply: Requires 4 x AAA 1.5V Alkaline Batteries (Rechargeable NiMH batteries are not recommended).
• Transmission Type: Directional Infrared (IR) carrier frequency (Requires direct line-of-sight to equipment).
• Maximum Operational Distance: 30 feet (10 meters) under standard indoor lighting conditions.
• Learning Frequency Spectrum: 15 kHz to 150 kHz IR carrier range.
• Memory Type: Non-volatile internal Flash ROM (Retains all programmed device codes and custom app macros during battery replacement).

High-Intent Troubleshooting & Frequently Asked Questions

What to Do If Directional Navigation Buttons Fail to Hold or Repeat Signal

If holding down the directional ring keys (Up, Down, Left, Right) fails to continuously scroll through menu lists on your TV or streaming receiver, it usually indicates corrupted learning data or an incorrect carrier frequency assignment. To fix this transmitter glitch, perform a complete hard factory reset:

1. Press and hold TV POWER and BACK simultaneously until the ring blinks Yellow twice.
2. Press OPTIONS, REPLAY, and HOME consecutively in exact order.
3. The menu ring will blink Red 4 times to confirm memory clearance.
4. Re-pair your equipment using direct SimpleSet or 5-digit code entry instead of raw key learning.

How to Fix Your Clicker When Apple TV Will Not Turn Off or Sleep

Because Apple TV hardware utilizes non-standard power sleep signals, pressing the primary white TV POWER button on your controller will turn off your television set but leave the Apple TV receiver powered on. To properly sleep your Apple box: press the HOME key once to return to the root screen, then hold the STREAMER POWER button for 3 seconds to send the official sleep trigger before turning off your TV set.

Why Volume Buttons Are Not Changing Sound on HomePod or AirPlay Systems

The One For All URC 7935 is an Infrared (IR) transmitter wand, whereas Apple HomePod wireless speakers communicate strictly over Bluetooth and Wi-Fi networks via AirPlay. If your sound is routed directly to AirPlay speakers, the remote cannot alter volume levels in the air. To control volume with your handset clicker, connect your audio output through physical TV ARC/HDMI or Optical Soundbar connections, then assign your volume keys directly to your TV or Soundbar brand using SimpleSet audio pairing (holding VOLUME + and VOLUME -).

Quick Reference Problem & Solution Summary

Observed Issue / Error Indicator	Root Cause	Immediate Technical Solution
LED ring flashes red repeatedly during code entry	Invalid 5-digit code entered	Verify your manufacturer code in the table and re-enter digits slowly.
Transmitter fails to control TV volume	Volume key lock assigned to streamer box	Execute Audio SimpleSet (hold Vol+ & Vol-) to lock volume control to TV or Soundbar.
One long red LED blink during learning	Infrared signal corrupted or misaligned	Re-align remote heads 1 inch apart on a flat surface and keep ambient lighting dim.
Buttons feel unresponsive or erratic	Low battery voltage supply	Replace all 4 AAA batteries with fresh 1.5V alkaline cells simultaneously.