GE 34708 Remote Control User Manual and Code List

GE 34708 Universal Remote Control User Manual & Programming Guide

Welcome to the ultimate setup guide for your GE 34708 UltraPro 4-Device Universal Remote Control. Designed by Jasco Products Company LLC, this versatile handset consolidates up to four separate audio/video components into one easy-to-use unit. Unlike older legacy universal remotes that required tedious code programming before performing basic commands, this GE generation comes pre-programmed out of the box for immediate, instant operation with Samsung TVs. Furthermore, while previous brand iterations used bulky button clusters, the 34708 utilizes an intuitive, dual-function SHIFT architecture that seamlessly toggles directional and menu keys. Whether you are setting up your TV, soundbar, cable receiver, or streaming box, this comprehensive manual provides clear, senior-friendly instructions, complete CL5 code tables, and expert troubleshooting tips to get your living room entertainment running smoothly again.

How to Instantly Pair Your GE 34708 Remote Out-of-the-Box (Quick Setup)

If you are pairing this remote control handset with a standard Samsung television, you do not need to enter any setup codes. The GE 34708 is factory-configured to operate Samsung TV sets out-of-the-box using direct infrared commands.

1. Slide open the rear battery compartment hatch and insert two (2) fresh AAA alkaline batteries, aligning the + and - terminals correctly.
2. Aim the transmitter directly at the front receiver panel of your Samsung TV.
3. Press and release the red POWER button (labeled ON•OFF). Your TV should turn on or off immediately.
4. Press the VOL + and VOL - buttons to confirm sound response. If your Samsung TV responds, your setup is already complete!

Note: For all other television brands (such as LG, Vizio, TCL, Sony, or Roku TV) or secondary media devices like soundbars and Blu-ray players, proceed to the step-by-step programming section below to enter your device code.

Button Map Layout & Physical Casing Directory

Understanding your handset's physical key layout makes programming and daily channel surfing effortless. The GE 34708 utilizes dual-function shift keys to conserve space while retaining full menu control.

Physical Button Casing Label	Icon / Visual Identifier	Native Function / Quick Action Description
ON•OFF	Red Circle / Line Icon	Toggles power on or off for the currently selected equipment mode.
TV	Text Label "TV"	Sets the remote to control your primary television set.
CBL / sat	Text Label "CBL/sat"	Sets handset mode to operate cable boxes, satellite receivers, or DVRs.
DVD / vcr	Text Label "DVD/vcr"	Sets remote mode to control DVD/Blu-Ray players or streaming set-top boxes.
AUX	Text Label "AUX"	Selects auxiliary devices like soundbars or receivers (omitted on 3-device model 34456).
SETUP	Text Label "SETUP"	Hold to activate setup mode, lock in device codes, or reassign master volume.
SHIFT	Text Label "SHIFT"	Toggles secondary functions printed above or alongside directional keys (remains active 10 sec).
INPUT / guide	Text "INPUT" / Secondary "guide"	Cycles video sources (HDMI 1, HDMI 2). In SHIFT mode, opens the TV channel guide.
RECORD / PLAY / STOP / REW / FF / PAUSE	Solid Circle / Triangle / Square / Arrows / Double Bar	Standard VCR, DVD, Blu-Ray, and DVR media playback transport controls.
VOL + / VOL -	Left / Right Directional Cluster	Adjusts volume levels. In SHIFT mode, functions as Left and Right menu navigation arrows.
CH Up / CH Down	Top / Bottom Directional Cluster	Changes channels sequentially. In SHIFT mode, functions as Up and Down menu arrows.
MUTE / ok	Text "MUTE" / Secondary "ok"	Mutes audio output. In SHIFT mode, acts as the OK / SELECT key to confirm menu options.
i / INFO / menu	Information "i" Icon / Secondary "menu"	Displays channel banner info. In SHIFT mode, opens the main TV setup menu.
NUMBERS (0-9)	Numeric Keypad 0 through 9	Direct channel input numbers and 4-digit code entry during programming.
DOT (•)	Small Dot Icon	Enters sub-channel decimals for over-the-air digital broadcasting (e.g., 4.1 or 9.2).
ENTER	Left-Down Return Arrow	Executes immediate channel entry on legacy cable boxes or television systems.
PREV. CH / exit	Return Arrow Icon / Secondary "exit"	Toggles back to the previously viewed channel. In SHIFT mode, exits on-screen menus.

System Compatibility & Hardware Stamp Identifiers

The GE 34708 Universal Remote Control belongs to the Jasco CL5 code architecture family. It is cross-compatible with dozens of identical chassis hardware revisions sold across North America. When identifying your remote, check the white sticker inside the battery compartment beneath the AAA batteries for match validation.

• Exact Part Number: GE 34708 (4-Device Architecture, Black Finish)
• Overlapping Hardware Variant Numbers: 33705, 33706, 33707, 33708, 34456 (3-device variant missing AUX key), 37123, 33701, 34140, 7252vers2 | 3/16
• Manufacturing Authorization Markings: Manufactured under license by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114
• Regulatory Compliance Numbers: US FCC Part 15 Compliant | Canada ICES-003 / NMB-003 Class B Digital Device
• Internal Database Version Tag: CL5 Code Reference Architecture
• Incompatible Hardware Protocols: Does not feature Bluetooth or Radio Frequency (RF) transmitters. Incompatible with hidden streaming dongles requiring direct RF connectivity (e.g., Amazon Fire TV Stick, Roku Streaming Stick). Compatible with tabletop IR streaming boxes (Roku Express, Roku Ultra, Apple TV).

Step-by-Step Programming Methods (Direct Entry & Auto Code Search)

Follow these easy, senior-friendly steps to pair your transmitter handset with any TV, audio soundbar, streaming box, or cable tuner.

Method 1: Direct Code Entry (Recommended)

This is the fastest method to connect your remote control wand when you have the 4-digit CL5 brand code available.

1. Manually power on the television, soundbar, or cable receiver you wish to control.
2. Press and hold the red SETUP button on the remote until the red LED indicator light remains continuously lit (approximately 2 seconds). Release the SETUP button.
3. Press and release the desired device mode button (TV, CBL, DVD, or AUX). The red LED light will flash once and stay on.
4. Use the numeric keypad to enter the first 4-digit code listed for your brand in the code table below.
5. If a valid code is entered, the red LED status light will shut off completely. If the code is invalid, the light will flash rapidly and stay lit, prompting you to re-enter a valid code.
6. Point the handset directly at the device and press the POWER button. If the device powers off, programming is successful. Test additional buttons like VOL + and INPUT. If some buttons do not respond, repeat the process using the next listed code for your brand.

Method 2: Auto Code Search (When Code Is Unknown)

Use Auto Code Search if your equipment brand is not listed in the standard code sheet or if listed codes fail to operate all features.

1. Manually turn on the device you want to program.
2. Press and hold the SETUP button until the red indicator light stays on solidly (about 2 seconds), then release it.
3. Press and release the target device button (TV, CBL, DVD, or AUX). The red light blinks once and stays on.
4. Point the remote directly at your equipment and press and release the POWER button (for TVs) or PLAY button (for DVD/media players). The red light will begin blinking every 2 seconds as it sends automated infrared signals.
5. Keep your finger positioned directly over the 1 key on the number pad.
6. The instant your device turns off (or begins playback), immediately press the 1 button to lock in the code. You have roughly two seconds to press 1 before the remote advances to the next code. The red LED light will turn off.
7. Turn the device back on and test key functions. If the unit does not respond properly, restart the Auto Code Search sequence.

How to Identify the Active 4-Digit Code Stored in Your Remote

If you used Auto Code Search and need to write down your code for future reference, use this identification sequence:

1. Press and hold SETUP until the red LED light turns on solidly, then release.
2. Press and release the appropriate device button (TV, CBL, DVD, or AUX).
3. Press and release the ENTER button.
4. Press and release the 1 button on the numeric keypad. Count the number of times the red light blinks. This number is your first digit (e.g., 2 blinks = 2; zero blinks = 0).
5. Repeat by pressing the 2 key for the second digit, the 3 key for the third digit, and the 4 key for the fourth digit. Record your 4-digit code.
6. Press ENTER to exit code identification mode.

Comprehensive GE Universal Remote CL5 Code List

Below are the official Jasco CL5 4-digit programming codes for popular television brands, sound systems, media players, and cable setup boxes across North America.

Television (TV) Brand Codes

TV Brand Name	Primary & Secondary CL5 4-Digit Programming Codes
Samsung	0105, 0077, 0009, 0104, 0109, 0172, 0329, 0812, 2051
LG	0178, 0012, 0005, 0009, 0280, 0698, 1663, 2731, 3787
Sony	0002, 0000, 0011, 0080, 0111, 0273, 0353, 0810, 4189
Vizio	5561, 5611, 0117, 0178, 1758
TCL / Roku TV	2891, 1741, 2434, 2429, 3183, 4395, 2014
Insignia	0103, 0189, 0217, 1204, 1564, 4395, 5381, 1979
Hisense	0073, 0182, 1660, 1173, 2014, 4395
Panasonic	0054, 0003, 0062, 0148, 0170, 0171, 0381, 1480, 0160
Philips / Magnavox	0005, 0003, 0054, 0171, 0183, 1154, 1454, 1866, 2371, 2552
RCA	0003, 0004, 0005, 0007, 0009, 0015, 0048, 0100, 0162, 1661, 2741, 4395
Sharp	0014, 0009, 0028, 0060, 0079, 0123, 0491, 0818, 1602, 2360
Toshiba	0156, 0009, 0060, 0112, 0119, 0181, 0845, 1343, 1356, 1704, 0811

Soundbar & Audio Receiver (AUX / AUD) Codes

Audio Brand	CL5 Audio & Soundbar Programming Codes
Bose	1933, 1229, 1629, 3708, 5600, 5611
Vizio Soundbar	2454, 1517, 3816, 3982
Samsung Audio	2609, 2832, 2137, 3382, 3320
Sony Audio	0158, 1058, 1258, 1758, 1858, 2172, 3720
Yamaha	0176, 0376, 1276, 1476, 2061, 2467, 3580
Polk Audio	0189, 0892, 1289, 2270, 3429

Streaming Media Players & Digital Converter Boxes

Media Player Brand	CL5 Streaming Device Programming Codes
Roku (Boxes, Express, Ultra)	5237, 5371, 5871, 1741, 2891
Apple TV	2615, 1115, 3020
Sony Streaming / Blu-Ray	1516, 1633, 2163, 2533
LG Streaming / Blu-Ray	0741, 1602, 2302

Advanced Master Volume & Reset Programming

Customize your remote's behavior to streamline audio management or clear custom codes.

Master Volume Control Feature

The Master Volume feature allows you to specify a single device (such as an audio soundbar or A/V receiver) to handle volume changes regardless of which device mode (TV, CBL, DVD) is currently active on your remote.

• To Enable Master Volume:
  1. Press and hold SETUP until the red indicator light stays on (2 seconds), then release.
  2. Press and release the device button for the unit you want to control audio continuously (e.g., AUX for soundbar).
  3. Press and release the MUTE button.
  4. Press and release the VOL + button. The red light will flash twice and turn off to confirm save.
• To Disable Master Volume:
  1. Press and hold SETUP until the red light stays on (2 seconds), then release.
  2. Press and release the device button currently designated as the volume master (e.g., AUX).
  3. Press and release the MUTE button.
  4. Press and release the VOL - button. The red indicator light will blink twice and turn off.

Factory Reset Sequence

If you need to restore your GE 34708 remote to its original factory configuration and erase all programmed device codes:

1. Press and hold the SETUP button until the red indicator light stays on solidly (approx. 2 seconds), then release.
2. Press and release the MUTE / ok button (or press OK).
3. Press and release the number 0 key on the keypad. The red indicator light will flash twice, confirming that all programmed codes have been wiped and memory is restored to factory defaults.

Technical Specifications & Infrared Operating Range

Battery Requirements	2 x AAA Alkaline Batteries (1.5V, non-rechargeable recommended)
Transmission Protocol	Direct Line-of-Sight Infrared (IR) Carrier Signal
Operational Distance	Up to 25 Feet (7.6 Meters) directly facing the device IR sensor
Physical Dimensions	5.50" L x 1.81" W x 0.80" D
Weight	3.36 ounces (without batteries)
Operating Voltage	2.4V to 3.2V DC

High-Intent Troubleshooting & Frequently Asked Questions

Why is my GE clicker completely unresponsive or sending wrong menu commands?

If your transmitter handset stops changing channels or keys perform incorrect actions, check if the remote is accidentally locked in SHIFT mode. When SHIFT mode is active, the directional arrows change from volume/channel keys into menu navigation cursors, and the LED flashes differently upon pressing buttons. Press and release the SHIFT button once to toggle back to standard control mode. Additionally, ensure battery levels are adequate; low voltage can cause partial signal output where power buttons work but numeric entries fail. Always swap out both AAA batteries simultaneously with fresh alkaline cells.

How do I fix partial functionality where power works but volume or menu buttons do nothing?

Partial control indicates that the programmed 4-digit code is only a partial match for your television's internal motherboard architecture. Electronics manufacturers frequently share infrared code tables across multiple chassis generations. To fix this, return to the Direct Code Entry section and program the remote using the next sequential code listed for your brand in the CL5 table. If you have exhausted listed codes, perform the Auto Code Search procedure to find a secondary IR frequency map that restores 100% button capability.

Can I pair this GE universal wand with a Roku Streaming Stick or Amazon Fire TV Stick hidden behind my TV?

No. The GE 34708 operates purely via optical Infrared (IR) beam signals requiring a direct, unobstructed line-of-sight to the receiver port. RF streaming hardware such as the Amazon Fire TV Stick, Roku Streaming Stick, or hidden Google Chromecast dongles rely exclusively on Bluetooth or 2.4GHz Radio Frequency (RF) signals. Because this GE transmitter does not feature RF or Bluetooth internal hardware, it cannot pair with stick devices. However, it works perfectly with tabletop streaming boxes that feature front-facing IR eye sensors, such as the Roku Express, Roku Ultra, Apple TV, and standard cable/satellite receivers across providers in New York, Texas, California, and nationwide.

Quick Reference Table: Problem vs. Immediate Solution

Symptom / Problem Observed	Immediate Diagnostic Action & Solution
Red light stays lit solid during setup	The remote is in setup mode. Enter a 4-digit CL5 code or press SETUP to exit.
Red LED blinks whenever any button is pressed	The handset is in SHIFT mode. Press and release SHIFT once to exit.
Red LED blinks rapidly after entering 4 digits	Invalid code entered. Check the CL5 list and re-enter a correct 4-digit code.
Remote fails to program Roku Stick or Fire Stick	Normal operation; RF sticks are incompatible. Works only with IR tabletop boxes.
Volume buttons operate TV instead of Soundbar	Configure the Master Volume Control feature to route audio to your AUX device.
Remote intermittently drops signal or freezes	Replace both AAA batteries with new alkaline batteries and clean battery contact terminals.