GE 37033 Universal Remote Control Manual & Programming Codes Guide

GE 37033 Universal Remote Control Manual & Programming Guide

Welcome to the ultimate setup directory for the GE 37033 4-Device Universal Remote Control (compatible with versions 34456, 24991, 66814, SRP6220R/27, and SRP6120R/27). Unlike older legacy infrared-only models that lacked dedicated streaming shortcuts or required long, multi-menu button sequences to launch smart hubs, this modern GE designer transmitter features dedicated hotkeys for quick access to popular streaming platforms and built-in out-of-the-box preprogramming. Whether you need to sync your television, stream with Roku, set up a soundbar, or reprogram an unconfigured button, this senior-friendly manual provides direct, easy-to-read instructions without complex jargon.

Table of Contents

• The Quick-Fix: Immediate Out-of-the-Box Setup
• Physical Button Layout & Function Map
• Device Compatibility & Hardware Identification
• Step-by-Step Programming Instructions
• Complete Multi-Digit Device Code Library
• Advanced Feature Setup & Master Volume Control
• Technical Specifications
• High-Intent Troubleshooting & Frequently Asked Questions
• Quick Reference Problem & Solution Summary

The Quick-Fix: Immediate Out-of-the-Box Setup

If you are setting up a Samsung TV or an infrared-based Roku box, your GE 37033 handset comes preprogrammed from the factory and requires zero setup codes:

• For Samsung Televisions: Point the transmitter handset directly at your Samsung TV screen and press the TV button. Test the POWER and VOL + buttons immediately.
• For Roku Streaming Media Players: Point the clicker directly at your IR-capable Roku player and press the strm button to take control instantly. (Note: Roku Streaming Sticks utilizing RF/Bluetooth or non-IR signals require original manufacturer remotes).

If your device brand is different, follow the Direct Code Entry Method below to sync your equipment in under two minutes.

Physical Button Layout & Function Map

Unlike standard legacy remotes that rely on complex multi-button combinations, the GE 37033 utilizes a streamlined, senior-friendly button layout. Pressing the SETUP/SHIFT button activates alternate control layers for secondary screen menus.

Physical Button Casing Label	Icon / Visual Identifier	Native Function / Quick Action Description
POWER	Red Circle with Line	Toggles hardware power ON or OFF for the currently selected device.
LIGHT	Light Bulb Symbol	Activates the soft LED button backlight for low-light viewing.
INPUT / GUIDE	Square with Arrow / "guide"	Cycles video inputs (HDMI 1, HDMI 2, AV). In Shift mode, opens the TV guide menu.
TV, STRM, DVR, CBL, B-RAY, AUX	Device Selector Keys	Selects which active entertainment device the transmitter is currently commanding.
REW, PLAY/PAUSE, FF, REC, STOP	Media Transport Icons	Standard playback buttons for DVRs, Blu-ray players, and streaming media services.
LIST, GUIDE, SLEEP, LAST	Secondary Function Keys	Displays recorded program lists, sleep timers, or jumps back to the previous channel.
SETUP / SHIFT	Gear / "setup shift"	Hold to program codes. Press once to switch primary keys to secondary menu functions.
UP, DOWN, LEFT, RIGHT, OK	Directional Pad / Center Key	Navigates smart TV menus and confirms onscreen item selections.
VOL + / VOL -	Side Arrow Pads / "vol"	Raises or lowers audio sound levels. In Shift mode, navigates horizontal menus.
CH ▲ / CH ▼	Top/Bottom Pads / "ch"	Changes channels up or down. In Shift mode, scrolls vertically through page menus.
APP1, FAV, APP2	Oval Quick Keys	Launches programmed streaming application hotkeys or opens favorite channel lists.
A, B, C, D	Yellow, Blue, Red, Green	Accesses contextual interactive features on cable boxes, satellite receivers, and Blu-ray players.
NUMBER PAD (0-9)	Numeric Keys 0 through 9	Directly enters channel numbers or programming security PIN codes.
DOT (•)	Dot Symbol	Enters sub-channels for digital over-the-air television broadcasts (e.g., 4.1 or 7.2).
ENTER / RETURN	Curved Arrow / "enter"	Confirms manual channel entry or jumps back to the prior application screen.

Device Compatibility & Hardware Identification

Specification / Hardware Identifier	Technical Details & Compatibility Scope
Compatible Hardware Revisions	GE 37033, 33709, 34456, 24991, 66814, SRP6220R/27, SRP6120R/27
Code Library Versions (CL String)	CL3, CL4, CL5, and CL6 (Sticker located inside battery compartment)
Regulatory Compliance	FCC Part 15 (Class B Digital Device), ICES-003 / NMB-003 (Canada)
Wireless Signal Protocol	Standard High-Output Infrared (IR) - Requires line-of-sight visibility
Primary Device Support	TVs, Cable/Satellite Boxes, Soundbars, Audio Receivers, Streaming Boxes, Blu-ray/DVD Players

Step-by-Step Programming Instructions

Method A: Direct Code Entry Sequence (Recommended)

This is the fastest method to sync your equipment using the code library table provided below.

1. Manually turn ON the target home theater device (e.g., TV, Soundbar, Cable Box) you want to program.
2. Press and hold the SETUP button on the remote until the top red indicator light turns on and remains solid (approx. 2 seconds). Release the SETUP button.
3. Press and release the desired device category key (TV, CBL, strm, or AUX). The red indicator light will blink once and stay lit.
4. Locate your equipment brand in the code table below and enter the first 4-digit programming code using the number pad.
   • If entered correctly, the red indicator light will turn off immediately.
   • If an invalid code is entered, the red light will flash repeatedly and remain lit. Re-enter the code carefully.
5. Point the handset at the device and press the POWER button. If the device turns off, your clicker is successfully programmed. If it does not respond, repeat steps 2–4 using the next 4-digit code listed for your brand.

Method B: Auto Code Search (Standard Sequence)

If your specific brand is not listed in the code table, use this automated search procedure:

1. Manually power ON the target viewing device.
2. Press and hold the SETUP button until the top red light turns on solid, then release it.
3. Press and release the target device button (e.g., TV). The red light will blink once and remain on.
4. Point the transmitter handset directly at the device and press the POWER button once. The remote will transmit a batch of 10 distinct codes, flashing the indicator light every few seconds.
5. If the target device turns off, proceed to step 6. If it remains powered on, press POWER again to send the next batch of 10 codes.
6. Once the device shuts off, manually power it back ON using its physical hardware power button on the frame.
7. Point the remote at the device and press VOL + once every 2 seconds to cycle backward through that 10-code batch until the device turns off again.
8. Press the target device button (e.g., TV) to lock in and store the operating code.

Complete Multi-Digit Device Code Library

Use these verified 4-digit code entries for version CL3, CL4, CL5, and CL6 GE universal remotes across major nationwide entertainment platforms and regional provider systems across New York, Texas, California, and nationwide.

Television (TV) Brand Codes

Brand Name	Verified 4-Digit Programming Codes
Samsung	0105, 0019, 0077, 0056, 0178, 2051, 0812, 5841
LG	0178, 0012, 0056, 0108, 0002, 0109, 3787, 1178, 3397
Sony	0000, 0080, 0111, 0011, 0273, 0353, 0810, 4110
Vizio	5561, 5611, 1758, 0178, 0056, 5791
TCL	2434, 2411, 3183, 1756, 0178, 4178
Hisense	2098, 1314, 0178, 0216, 2183, 4398
Sharp	0093, 0165, 0386, 0029, 0081, 2360
Panasonic	0054, 0170, 0062, 0003, 0375, 1480
Toshiba	0156, 0060, 0154, 1256, 0003, 1524
Philips	0054, 0178, 0013, 0037, 0708, 1454
Insignia	0178, 0135, 0156, 2049, 1326
RCA	0047, 0000, 0090, 0018, 0135, 0054, 2746, 1347
Sanyo	0154, 0088, 0107, 0002, 0013, 1142
Element	1687, 2183, 0178, 1356, 2256, 3559
Westinghouse	0178, 0457, 1282, 0885, 1577, 3000
Sceptre	3521, 4071, 1217, 2506, 0000

Streaming Players, Soundbars & Audio Receivers

Device Category & Brand	Verified 4-Digit Programming Codes
Roku (IR Models)	5237, 5306, 5371, 2371, 5871
Apple TV	2615, 1115, 0815, 3815
Amazon Fire TV (IR Pass-through)	4812, 3612, 5912
Bose Audio / Soundbars	1229, 0639, 1933, 3708, 4039
Denon Receivers	1360, 0004, 2857, 3347, 4160
LG Soundbars	2197, 1293, 2676, 3217, 4293
Samsung Soundbars	2609, 1868, 2809, 3320, 4868
Sony Audio / Receivers	0158, 1058, 1758, 2172, 4058
Yamaha Audio Systems	0176, 0376, 1276, 2061, 3576, 4376
Vizio Soundbars	2454, 1517, 3117, 4517

Advanced Feature Setup & Master Volume Control

Configuring Master Volume Control (Audio Lock)

Master Volume Control allows you to lock audio commands (VOL +, VOL -, and MUTE) to a soundbar or audio receiver regardless of which mode the remote is in.

1. Press and hold the SETUP button until the red indicator remains solid, then release it.
2. Press and release the device button that controls your audio output (e.g., AUX for a soundbar).
3. Press and release the MUTE button.
4. Press and release the VOL + key. The red indicator light will blink twice and turn off to confirm that Master Volume Control is locked to your soundbar.
5. To disable Master Volume Control: Repeat steps 1–3, then press VOL - in step 4.

Resetting the Remote Control to Factory Settings

If the remote becomes unresponsive or fails to accept programming codes, perform a full memory wipe:

1. Press and hold the SETUP button until the red light turns on solid, then release it.
2. Press and release the MUTE button.
3. Press and release the number 0 key. The red LED indicator light will flash twice, confirming that all programmed codes have been cleared and restored to default factory settings.

Technical Specifications

• Power Requirements: Requires two (2) AAA alkaline batteries (1.5V). Non-alkaline or rechargeable batteries are not recommended.
• Effective Signal Distance: Up to 30 feet in line-of-sight environments.
• Memory Type: Non-volatile EEPROM (retains stored code library during battery replacement).
• IR Wavelength: Standard 940nm infrared transmission matrix.

High-Intent Troubleshooting & Frequently Asked Questions

Why Are the Menu and Directional Pad Buttons Not Navigating My Screen Correctly?

If your transmitter turns the TV power on and off but pressing the directional arrows or OK key changes channels or adjusts volume instead of moving through menus, the remote was paired using a suboptimal brand code. Many television brands share partial infrared commands. To fix this, execute the Auto Code Search Method to find a comprehensive code in the internal library that matches all secondary menu layers. Additionally, if the center OK key fails to confirm a selected menu item, press the ENTER key located at the bottom of the number pad as an alternative confirmation command.

What Should I Do If My Remote Control Becomes Unresponsive or the LED Light Stops Flashing?

When buttons become stiff, unresponsive, or the red light stops illuminating, perform a complete power reset on the clicker handset:

1. Open the rear battery door and remove both AAA batteries. Check for battery acid residue or corrosion on the spring contacts.
2. Leave the batteries out for 2 to 3 minutes.
3. With the batteries removed, systematically press and release every single key on the remote key face at least once. This clears residual electrical charges stored in the internal capacitors and frees stuck rubber buttons.
4. Insert two fresh AAA alkaline batteries, making sure polarity (+/-) matches the interior casing diagram.

How Do I Clear Software Glitches When Programing Combination Devices Like TV/DVD Units?

When configuring dual-function devices (such as TV/DVD combo units or TV/VCR setups), the internal micro-controller can lock up or keep the red LED illuminated continuously. When this occurs, execute a Factory Reset: Hold SETUP until the LED turns solid red, press MUTE once, then press 0. The LED will blink twice to confirm that the memory is clear. After resetting, program the TV portion under the TV button first using direct entry, then program the playback functionality under the B-RAY or AUX mode key using the designated combo code.

Quick Reference Problem & Solution Summary

Observed Symptom	Primary Root Cause	Immediate Diagnostic Solution
Red LED light blinks continuously	Transmitter is stuck in SHIFT mode layer	Press and release the SETUP / SHIFT key once to return to primary mode.
Device powers ON but volume buttons fail	Audio commands locked to incorrect device	Perform the Master Volume Control unlock sequence (SETUP > MUTE > VOL -).
Red light flashes rapidly during code entry	Incorrect or unsupported 4-digit code entered	Verify your remote's internal sticker version (CL3/CL4/CL5/CL6) and re-enter a valid code.
Remote loses stored settings frequently	Low battery voltage causing memory drop	Replace both batteries with fresh, matching AAA alkaline batteries.
Specific buttons (like OK) do not respond	Partial code compatibility issue	Perform Auto Code Search to lock in a code with complete button mapping.