Passer au contenu
Livraison standard gratuite aux États-Unis, Canada 14,99 $ et dans le monde entier 19,99 $
Livraison standard gratuite aux États-Unis, Canada 14,99 $ et dans le monde entier 19,99 $

Samsung BN59-01312G Smart Voice Remote Control User Manual

Samsung BN59-01312G Smart TV Remote Control User Manual & Programming Guide

Welcome to the ultimate setup and configuration guide for your Samsung BN59-01312G Smart TV Remote Control. Whether you are installing a factory-original Samsung controller or configuring an aftermarket replacement, this document provides clear, stress-free, step-by-step instructions to get your home entertainment system running smoothly. Unlike older, confusing remote controls that were cluttered with dozens of small buttons and required you to look up complicated numeric programming codes, this modern smart remote utilizes wireless Bluetooth pairing and an elegant, streamlined interface. This guide is written with clear language and broken down into micro-steps to ensure you can easily restore complete control over your television without technical frustration.

Table of Contents

Step-by-Step Bluetooth & Voice Microphone Pairing

Because this is a smart controller, its premium voice search, smart assistant integration, and advanced hub navigation layers require an active wireless connection with your display. If your remote is only turning the television on and off, it is running on basic backup infrared signals and must be synchronized via Bluetooth using these micro-steps:

  1. Turn on your television screen by pressing the physical POWER button located directly on the TV frame or by using your old remote.
  2. Stand directly in front of your television, positioning yourself between 3 and 6 feet away from the screen for optimal signal strength.
  3. Point the top edge of the BN59-01312G handset straight at the remote control sensor located at the bottom-center or bottom-right of your TV frame.
  4. Simultaneously press and hold down both the RETURN/BACK (↩) button and the PLAY/PAUSE (⏯) button.
  5. Keep both buttons held down firmly and continuously for 3 to 5 seconds. (Note: If you are configuring an aftermarket replacement variant, you may need to hold these buttons down for 5 to 8 seconds).
  6. Do not release your grip until you see an animated pairing graphic or the text notification "Pairing Completed" appear on your television screen.
  7. Once the pairing graphic disappears, test the connection by tapping the MICROPHONE button. Keep the remote at least 0.6 inches (15.24 mm) away from your face when speaking into the built-in microphone opening to ensure accurate voice recognition.
Is Your Genuine Samsung BN59-01312G Remote Lost, Sticky, or Failing to Pair?

Factory-original Samsung smart controllers utilize specialized wireless microchips natively synced to premium Ultra HD display engines and intricate voice-activation menus. If your current remote control suffers from sticky keys, broken battery latches, or weakened Bluetooth range due to accidental drops, a genuine original equipment manufacturer (OEM) replacement is necessary. Avoid low-grade universal remotes that lack internal microphones, drop connection memory, and fail to load your streaming apps when the batteries are swapped.

Order an Exact 100% Original Genuine OEM Samsung BN59-01312G Replacement Remote Here with Free Shipping →

How This Remote Differs From Older Infrared Models

The Samsung BN59-01312G marks a radical design departure from older, traditional plastic remotes. By prioritizing a minimalistic layout, it removes unnecessary clutter while introducing advanced wireless capabilities:

  • Elimination of the 0-9 Keypad: Unlike older infrared-only remotes that rely on a massive block of physical number keys, this controller features a single 123 Color/Number button. This key instantly projects an interactive, virtual numeric pad onto your TV screen, keeping the physical handset small and easy to hold.
  • One-Touch Streaming Shortcuts: This generation replaces deep sub-menu navigation strings with dedicated physical hotkeys for Netflix, Prime Video, Hulu, and Rakuten TV, launching your favorite applications instantly from any screen.
  • Smart Dual-Signal Integration: Previous generations operated strictly over a clear line-of-sight infrared beam. The BN59-01312G uses basic infrared solely out of the box for core power functions, shifting entirely to secure Bluetooth wireless once paired to run advanced Smart Hub applications and voice search.

Comprehensive Button Reference Map

Familiarizing yourself with the specific layouts and dual-purpose toggles on your controller will help you navigate your menus effortlessly.

Samsung BN59 - 01312G Smart TV Remote Control
Button function diagram layout for Samsung BN59-01312G factory original remote control

  • POWER (⏻): Positioned at the very top left of the remote. Press this key to turn your smart television completely ON or OFF.
  • MICROPHONE / VOICE SEARCH: Located at the top center. Press and hold this button while speaking a command to activate voice navigation via Samsung Bixby or Amazon Alexa.
  • 123 (Color/Number Button): Located directly below the power key. Pressing this button toggles an interactive virtual number pad and contextual colored options window on your screen to enter channels, PIN codes, or zip codes.
  • FOUR COLORED DOTS: Located below the microphone on the right. Toggles contextual menu settings that correspond directly to color-coded options on your television screen.
  • AMBIENT MODE: Marked with a small window icon. Transforms your blank television screen into a decorative panel that displays artwork, real-time weather, headlines, or customized background patterns.
  • DIRECTIONAL PAD (Up, Down, Left, Right): The large circular ring near the center of the remote. Press the outer edges to navigate menus, scroll through app grids, or move your selection focus.
  • SELECT: The solid round button located inside the center of the Directional Pad ring. Press to confirm choices or open apps. Pressing this button while watching live television displays detailed program data.
  • RETURN / BACK (↩): Located below the circular navigation ring on the left side. Press once to return to the previous menu screen. Press and hold down for 1 second or more to instantly exit a running application or return to the last channel viewed.
  • SMART HUB / HOME: Marked with a house icon. Press this button to pull up the main television home screen menu to access inputs, connected devices, and your app library.
  • PLAY / PAUSE (⏯): Located below the circular navigation ring on the right side. Press to view on-screen media playback bars to play, pause, rewind, or fast-forward videos.
  • VOL (Volume Control Toggle): A raised silver bar. Push the bar upward to increase audio levels or pull it downward to lower them. Press the bar straight inward like a button to instantly toggle MUTE.
  • CH (Channel Control Toggle): A raised silver bar located next to the volume control. Push upward to go to the next channel up, or pull downward to go down a channel. Press the bar straight inward to open the full on-screen Program Guide.
  • APP SHORTCUTS: Positioned at the very bottom of the handset. These dedicated branded keys instantly boot up Netflix, Prime Video, Hulu, or Rakuten TV without navigating the Smart Hub.

TV Compatibility & System Constraints

The BN59-01312G is engineered specifically for premium Samsung 4K Ultra High Definition (UHD) smart televisions containing native Bluetooth receiver modules.

Explicitly Compatible Samsung Smart TV Models

This controller is fully verified and natively compatible with the following specific television models:

  • UN49RU8000FXZA
  • UN55RU740DFXZA
  • UN55RU8000FXZA
  • UN55RU800DFXZA
  • UN65RU740DFXZA
  • UN65RU8000FXZA
  • UN65RU800DFXZA
  • UN75RU8000FXZA
  • UN75RU800DFXZA
  • UN82RU8000FXZA
  • UN82RU800DFXZA

General System Architecture Compatibility

  • Voice-Enabled Mainframe Series: Works with general Samsung television configurations built between 2018 and 2024 that explicitly support native voice interaction features.

Incompatible Setups & Known Hardware Constraints

  • External Cable & Satellite Boxes: This remote control cannot be programmed directly to run third-party cable box channel tuners or satellite receiver frames.
  • Direct Soundbar Wireless Pairing: The remote cannot pair directly to a soundbar via Bluetooth. Soundbars must be configured through the television's ARC/Optical audio loops.
  • TU7000 Series Exception: This remote control is documented to experience pairing failures and compatibility rejections with the 2020 70" Crystal UHD 4K Smart TV variant (Model Number: TU7000).

Advanced Multi-Device Programming & Hidden Menus

Controlling External Devices via Anynet+ (HDMI-CEC)

Instead of manual code entry, this smart remote relies on Samsung's built-in Anynet+ system to manage external devices like Blu-ray players or home theater systems:

  1. Connect your external device to your Samsung TV using a high-speed HDMI cable.
  2. Press the SMART HUB / HOME button on your remote control, move left to Settings, and select General.
  3. Select External Device Manager, highlight Anynet+ (HDMI-CEC), and verify that it is turned ON.
  4. The TV will automatically register the connected device, allowing your BN59-01312G remote to navigate its core menus without additional configuration.

Hidden System Controls & Accessibility Menus

  • The Hidden Game Bar: If your television is placed into Game Mode, pressing and holding the PLAY/PAUSE (⏯) button for 3 seconds unlocks a hidden system menu. This displays real-time frame rates, input lag stats, HDR settings, and wireless headset adjustments.
  • Accessibility Shortcuts Menu: If you press and hold down the silver VOLUME bar inward like a button for 2 seconds or longer, the television will override standard programming to launch the Accessibility Shortcuts screen. From here, you can quickly toggle on-screen features like Voice Guide Volume, Grayscale Video Modes, Color Inversion, and Sign Language Zoom.

Technical Specifications

  • Model Name / Designation: BN59-01312G (Covers Samsung OEM and Aftermarket editions)
  • Signal Transmission Technology: Dual-Integration (Infrared for base level operations; Bluetooth for smart feature processing)
  • Battery Requirements: Two (2) standard AA alkaline batteries (Slide-down battery cover design)
  • Microphone Proximity Target: 0.6 inches (15.24 mm) minimum distance from user during speech
  • Physical Core Layout: 13 Dedicated function keys with an integrated 4-way circular directional navigation pad and 2 physical rocker switches

Troubleshooting & Common Fixes

What to Do If Your Remote Voice Search and Microphone Stop Responding

If your television fails to register inputs when you press the microphone button, or if voice searches return error messages, it is usually caused by a software glitch or a pairing disconnect. Try these fixes in order:

  1. Execute a Television Soft Reset: Press and hold down the physical POWER button on your remote control. Continue holding it down continuously. The television screen will shut off. Do not release the button yet. Keep holding for several seconds until the television turns itself back on and displays its start-up logo. This clears minor software bugs in the TV's operating system.
  2. Re-establish the Bluetooth Connection: Press and hold down the RETURN/BACK (↩) button and the PLAY/PAUSE (⏯) button simultaneously for 3 to 5 seconds to re-authenticate the pairing connection.
  3. Toggle the System Voice Engine: Using your remote navigation ring, navigate to Settings → Journal → Wise → Voice Assistant. Change the selected assistant engine from Alexa over to Bixby (or vice versa). Click OK to confirm, then follow the on-screen configuration prompts to reset the voice system.

How to Fix Bluetooth Pairing Failures and Connection Rejections

If your remote fails to sync with your television display, shows an "Incompatible Device" prompt, or stops communicating completely despite changing the batteries, follow these steps to reset the wireless connection:

  1. Turn the television completely off, unplug its power cable from the wall outlet, wait 60 seconds, plug it back in, and turn it back on.
  2. Slide the rear plastic cover down, remove the existing AA batteries, and check the metal contacts inside for dust or debris.
  3. Install two brand-new, matching AA alkaline batteries. Do not mix old and new batteries, and do not combine different battery types.
  4. Stand 3 feet away from the center of the TV screen. Point the top of the handset directly at the remote sensor on the bottom of the TV frame.
  5. Press and hold down the RETURN/BACK (↩) and PLAY/PAUSE (⏯) keys together for a full 5 to 8 seconds without moving the remote. Let go only when the text on the screen reads "Pairing Completed".

What to Do If Your Remote Stops Controlling Volume on a Connected Soundbar

If your remote changes channels and runs television menus but refuses to adjust the volume on a connected Samsung soundbar, verify your audio configurations using these steps:

  1. Verify that your soundbar is securely attached to your television using either an HDMI cable plugged into the HDMI (ARC) port, or via a high-quality digital Optical cable.
  2. Press the SMART HUB / HOME button on your remote control and go to Settings → Sound → Sound Output.
  3. Highlight your connected Samsung soundbar from the selection list, choose Close, and exit the menu screen.
  4. Ensure the soundbar unit is powered on. Point your remote directly at the soundbar and press and hold the physical WOOFER button down for approximately 5 seconds until the soundbar front screen reads "ON - TV REMOTE".

Quick Troubleshooting Reference Table

Problem Identified Immediate Corrective Solution
Microphone fails to register voice searches Hold down the remote's POWER button until the TV restarts to perform a soft reset. Move remote at least 0.6 inches away from your face when speaking.
Pairing connection fails or displays a rejection error Hold the RETURN (↩) and PLAY/PAUSE (⏯) keys together for 5 to 8 seconds to reset the connection.
Connected soundbar volume refuses to adjust Press and hold the WOOFER button for 5 seconds until the soundbar reads "ON - TV REMOTE".
An unexpected "Accessibility Menu" keeps popping up You are holding the VOLUME bar down too long. Tap the bar briefly inward to toggle standard mute features without entering accessibility loops.

Searching for alternative manual logs or configuration layout sheets for a different Samsung product generation? Head back to our central database index of Samsung Remote Control Reference Directories to coordinate another media navigation system configuration.