Samsung AA59-00600A TV Remote Control Manual
Program your Samsung AA59-00600A TV remote control accurately with this comprehensive resource. This manual provides step-by-step setup sequences, universal pairing methods, and an exhaustive list of fully compatible smart television models.
Is Your Samsung Remote Broken or Completely Dead?
If your current controller has sticky keys, physical case damage, or refuses to emit a signal after battery swaps, it might need to be replaced. Skip the cheap universal remotes that lose programming configurations when the batteries die.
Get a 100% Original Genuine OEM Samsung AA59-00600A Replacement Remote Here with Free Shipping →
Introduction
The Samsung AA59-00600A is a dedicated infrared television control engineered for clear, intuitive navigation of your Samsung entertainment system ecosystem. Use our detailed guide layout and technical schematic breakdown below to master your hardware functions.
Key Functions of the Samsung AA59-00600A Remote Control
- Power Button (On/Off): Boots your television or immediately puts the main display board into a safe standby mode.
- Volume Control (Up/Down): Safely scales or minimizes the direct audio dB power of your connected speaker system.
- Channel Control (Up/Down): Switches programming feeds continuously forward or backward across digital over-the-air tuners.
- Mute Button: Instantly kills standard audio frequencies. Toggle a second time to safely restore sound levels.
- Source / Input Button: Cycles active display channels among connected hardware ports such as HDMI 1, HDMI 2, AV components, or streaming boxes.
Pairing the Remote Control with Your Samsung TV
1. Automatic Sync Pairing Sequence
- Ensure your television power cord is plugged into an active wall socket and powered on.
- Aim the top-edge infrared emitter diode on the remote controller directly toward the center base frame of the TV.
- Press and hold down the Power button and the Source/Input button together at the same time. Keep them pressed until the television display screen flickers or prints an on-screen reaction (typically within 3 to 5 seconds).
- Release both keys. Your transmission channel is successfully matched.
2. Manual Selection Configuration (Backup Method)
- Access the physical menu or hit the hardware settings panel toggle directly on your TV.
- Navigate the setup tabs to the Universal Remote Setup or Remote Control Management column matrix.
- Select the function line item named Pair New Remote Control or its exact equivalent label.
- Follow the on-screen TV layout illustrations to complete internal receiver validation.
Compatible Samsung TV Models List
This remote control immediately controls and replaces original equipment configurations for the following Samsung E-Series, B-Series, D-Series, and EH-Series smart display structures:
| Compatible Model Number | Samsung TV Series Identifier |
|---|---|
| PN43E440A2F | E Series |
| PN43E450A1F | E Series |
| PN51E440A2F | E Series |
| PN51E450A1F | E Series |
| PN51E530A3F | E Series |
| PN51E535A3F | E Series |
| PN60E530A3F | E Series |
| PN60E535A3F | E Series |
| T22B350ND | B Series |
| T24B350ND | B Series |
| T27B350ND | B Series |
| T28D310NH | D Series |
| UN19F4000AF | F Series |
| UN19F4000BF | F Series |
| UN22F5000AF | F Series |
| UN26EH4000F | EH Series |
| UN29F4000AF | F Series |
| UN32EH4000F | EH Series |
| UN32EH4050F | EH Series |
| UN32EH5000F | EH Series |
| UN32F5000AF | F Series |
| UN32F5050AF | F Series |
| UN37EH5000F | EH Series |
| UN39FH5000F | FH Series |
| UN40EH5000F | EH Series |
| UN40EH5050F | EH Series |
| UN40EH6000F | EH Series |
| UN40EH6050F | EH Series |
| UN40F5000AF | F Series |
| UN46EH5000F | EH Series |
| UN46EH5050F | EH Series |
| UN46EH6000F | EH Series |
| UN46F5000AF | F Series |
| UN50EH5000F | EH Series |
| UN50EH5000V | EH Series |
| UN50EH6000F | EH Series |
| UN50EH6050F | EH Series |
| UN50F5000AF | F Series |
| UN55EH6000F | EH Series |
| UN55EH6050F | EH Series |
| UN60EH6000F | EH Series |
| UN60EH6050F | EH Series |
| UN65EH6000F | EH Series |
| UN65EH6050F | EH Series |
Troubleshooting Guide for Samsung AA59-00600A Remote Control
If your television fails to respond to incoming control requests, apply these quick, non-destructive diagnostic step arrays:
1. Remote Control Instantly Fails to Transmit
- Analyze Power Supplies: Ensure the battery chamber cells contain fully matching, premium fresh configurations. Swap old arrays immediately.
- Verify Line-of-Sight Traces: Confirm you are standing directly in path of the TV sensor array window. Clear soundbars, decor items, or glass blockades obstructing communication.
2. Pairing Failures & Connection Loops
- Recycle Automatic Setup: Retain firm pressure on the simultaneous Power and Input node combination until your TV restarts or executes feedback. If loops persist, switch immediately to our manual platform directory route outlined above.
3. Dead or Jammed Buttons
- Debris Extraction: Wipe the face casing thoroughly with an explicit microfiber rag. Built-up grease elements can drift past structural rings and insulate contact fields below.
4. Cross-Signal Interference
- Dampen Local Interferences: Nearby high-output electronic platforms, massive localized Wi-Fi routers, or faulty ballasts in structural fluorescent lights can jam IR signal transfers. Try adjusting setup distances.
5. Smart Hub and Application Freezes
- Perform a Hard System Cycle: Turn off your Smart TV. Pull the power block terminal directly from the main household wall socket. Let it remain completely unpowered for 60 seconds, reconnect the terminal, and boot back into the hub interface.
Samsung AA59-00600A TV Remote Control Manual Download
For deep industrial documentation, factory blueprint logs, and advanced operational records, browse or save our verified cloud document repository via Box below:
Searching for configuration keys or technical code documentation for a different product line? Re-enter our central index of Samsung Remote Control Manual Indexes to diagnose another display device variant.